Google Pixel 9a Rear Cover Installation

Written By: Spencer Day
  • Comments: 0
Google Pixel 9a Rear Cover Installation

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

This guide shows how to install the rear cover on your Google Pixel 9a smartphone. Note that there are a combination of adhesive installation guides that need to be included before this guide, depending on the repair.

  1. hwwCfeLX3tCMo5HI
    hwwCfeLX3tCMo5HI
    GEAXr1ii3T4tgaO2
    NTMkuw2ySmmaVmZI

    • Use the point of a spudger to lift and remove the plastic liners from the adhesive around the rear cameras.

    • If the adhesive starts to pull up with the liner, lay it back in place and use your spudger to secure it again.

  2. TKV1xbIJJFskEGPl
    TKV1xbIJJFskEGPl
    eHHv2r2vMrKfS6cK

    • Use the pull tabs to remove the final liner from the rear cover adhesive.

  3. RnnmAFFeisYIr3F6
    RnnmAFFeisYIr3F6
    SK4Go2MpYpuuwYC6
    F34bmaOVHJIcy2Bi

    • Align the rear cover over the frame and press it into place.

  4. O1MWPAwCIuijhC5P
    O1MWPAwCIuijhC5P
    mnZHXKHGBWyqnac2
    VkGHwL6IGHpPjDD2

Author

Spencer Day

Member since: 14/09/22

117606 Reputation

0 comments