HP EliteBook 840 G9 Memory Module Shield Tape Peel

Written By: Spencer Day
  • Comments: 0
HP EliteBook 840 G9 Memory Module Shield Tape Peel

Difficulty

Moderate

Steps

1

Time Required

No estimate

Introduction

This guide shows how to peel up the tape on the memory module shield.

  1. XTqmoDOv13PPa2Y1
    XTqmoDOv13PPa2Y1
    i5LJamnhwXwA3Mww
    etugDjS5WIxicCqQ

    • If the tape is difficult to remove, use an iOpener or hair dryer to lightly heat it. Be careful not to overheat the tape or the surrounding components.

    • Use tweezers or your fingers to peel the tape off the bottom edge of the heat sink.

    • You don't need to fully remove the tape—it can stay attached to the metal shield.

Author

Spencer Day

Member since: 14/09/22

117606 Reputation

0 comments