Hoover Power Scrub FH50150 Handle Replacement

Written By: Leo

Difficulty

Moderate

Steps

Time Required

5 minutes

Introduction

This Guide shows you how to replace the handle.

Push the button on the top of the clean water/solutions tank and pull on the handle below the button simultaneously. The tank should easily swing out.

Using the screwdriver, unscrew both of the screws on the backside of the handle.

Pull the handle upwards. It should freely slide away from the base of the machine.

What size are the screws?

Conclusion

To reassemble your device, follow these instructions in reverse order.

Member since: 23/01/18

377 Reputation

The two screw ro attached the handleon my FH50150B are missing, so what size are the screws? Thanks.

The two screws to attached the handle on my FH50150B are missing, so what size are the screws? Thanks.