Introduction
If your Logitech Zone Vibe 100 is having difficulties with the microphone, or you are having a hard time being heard for audio reasons- be sure to follow this guide.
This guide requires soldering. If you're unfamiliar with soldering, review the How to Solder and Desolder Connections guide and take appropriate precautions before beginning.
-
-
On the left speaker housing, remove the four 4.5 mm screws with a T3 Torx screwdriver.
-
Remove the single 3.3 mm Phillips #00 screw.
-
-
-
Remove plastic cover from the microphone hinge with your hands and clean any debris with a microfiber cloth.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
