Double integration
For (Riemann) integrals, we consider the Riemann sum.
Recall in the one-variable case, we partition an interval into more and more subintervals with smaller and smaller width, and we are integrating over the interval
by summing the areas of corresponding rectangles for each subinterval.
For the multivariable case, we need to do something similar, but the problem arises when we need to partition 'interval'
in
or
in general. (Actually, we only have the term interval in
.)
In multivariable case, we need to consider not just 'interval' itself (which is undefined in multivariable case), but Cartesian product
over intervals for
, and more generally n-ary Cartesian product over intervals for
.
Definition. (n-ary Cartesian product)
The n-ary Cartesian product over
sets
is the set
of
-tuples (or vectors).
Remark.
- recall that interval is essentially a set, e.g.
.
- 2-ary Cartesian product is simply called Cartesian product, e.g.
is Cartesian product over two intervals, and also a rectangle with side lengths 1 and 2 geometrically.
- special case:
is called n-ary Cartesian power and is denoted by
, e.g.
.
Area (for
), volume (for
) or measure (for each positive number
) of geometric objects (e.g. rectangles in
and cubes in
) in
is the product of the lengths of all its sides (in different dimensions).
Example.
is the Cartesian product over two intervals (It is square with side length
in
geometrically)
is the 3-ary Cartesian product over three intervals (It is a rectangular cuboid in
geometrically)
is the 4-ary Cartesian product over four intervals, or 4-ary Cartesian power (it is denoted as
) (It is a 4-dimensional cube in
geometrically)
Now, we are ready to define multiple integral in an analogous way compared with single integral. For simplicity, let us first discuss double integral,
and then generalize it to multiple integral in an analogous way.
Definition. (Double integrals)
Let
be a function defined on a rectangle
in
.
Consider a partition of
into small rectangles with areas
respectively. Choose an arbitrary point
in the
th rectangle. The function
is integrable over
if
exists. In that case, we denote this limit by
(
is a mnemonic of area),
and call it the double integral of
over
.
A physical meaning of double integration is computing volume.
Remark.
- if
is not always
, the region below the
-plane has negative volume, so this negative volume will cancel out the positive volume, which may or may not be desired
- if
is always negative, then the volume computed by this formula is negative, and we usually take its absolute value to get the volume, because volume is usually defined to be nonnegative
Let's also introduce some properties of double integral to ease computation of double integral.
Proposition. (Properties of double integral)
Let
and
be integrable functions defined on a rectangle
in
.
Then, the following properties hold.
- (Linearity)
is also integrable over
for each real number
and
, and
- (Monotonicity) if
for each
, then
- (Triangle inequality)
is integrable over
and
Remark.
Because nice functions are often continuous, most nice functions are integrable.
Iterated integrals
Thankfully, we need not always work with Riemann sums every time we want to calculate an integral in more than one variable. There are some results that make life a bit easier for us.
Before stating the result, we need to define iterated integral, which is used in the results.
Definition. (Iterated integral)
Let
be a continuous function defined on a rectangle
in
.
The iterated integral is defined by
and
Computation of iterated integrals is generally much easier than computing the double integral directly using Riemann sum. So, it will be nice if we
have some relationships between iterated integral and double integral for us to compute double integral with the help of iterated integral.
It is indeed the case and the following theorem is the bridge between iterated integral and double integral.
Theorem. (Fubini's theorem)
Let
be a continuous function defined on a rectangle
in
. Then,
Remark.
- i.e., we can use iterated integral in either order to compute the corresponding double integral
- we should notice the change of bounds for each integral after changing the integration order
Proof.
(i) Because
for each
, by the proposition of volume given by double integration, the volume is
.
By Fubini's theorem, this equals
Remark. Geometrically, the graph is a rectangular cuboid, and its volume is given by product of each side length, namely
, which matches with our answer.
(ii) The desired volume is given by
(double integral of a constant function
over
the rectangle
with length
and width
). (We may also express the integral as
without affecting the result.) Then, by Fubini's theorem,
Double integrals over more general regions in R2
We have defined double integrals over rectangles in
. However, we often want to
compute double integral over regions with shape other than rectangle, e.g. circle, triangle, etc.
Therefore, we will discuss an approach to compute double integrals over more general regions reasonably, without altering the definition of double integrals.
Consider a function
in which
is a general region.
To apply the definition of double integrals, we need to transform the general region
to a rectangle (say
).
An approach is finding a rectangle
containing
(i.e.,
), and let
for each
lying outside
(i.e., for each
). Because the value of the function is zero
outside the region we are integrating over, this does not change the volume under the graph of
over
, so
this way is a good way to define such double integrals. Let's define such double integrals formally in the following.
Definition. (Double integrals over general regions)
Let
be a function defined on a region (of arbitrary shape)
. Then, we define
for each
lying outside
(i.e., for each
), and define the double integral of function
over the region
by
if the latter integral exists.
Remark.
Then, we may compute double integrals over general regions by computing the corresponding Riemann sum for the latter integral.
However, this way of computation (by computing Riemann sum) is generally very difficult, and usually we use a generalized version of Fubini's theorem to compute such integrals. It will be discussed in the following.
Theorem. (Generalized Fubini's theorem)
Let
be a continuous function defined on a region (with arbitrary shape)
. Then, the following hold.
(i) If
in which functions
and
are continuous, then
(ii) If
in which functions
and
are continuous, then
in which
are real numbers satisfying the above conditions.
Proof.
We can prove this theorem by Fubini's theorem (ungeneralized version) and applying the definition of double integrals
over general regions. (We can use Fubini's theorem because we assume that functions
and
are continuous.)
Part (i): (
)
Take arbitrary rectangle
containing
(i.e.
and
).
Then, define
if
.
After that,
The result follows.
(We say that whether equality holds in the above inequalities does not matter, because the definite integral over a point equals zero anyway, so it does not affect the result.)
Part (ii): (
)
Similarly, take arbitrary rectangle
containing
(i.e.
and
).
Then, define
if
.
After that,
The result follows.
Remark.
Usually, finding the bounds for
and
is the most difficult step when we compute such double integrals.
Example.
Let
be the triangle in
with vertices
and
. Prove that
.
Proof.
Approach 1: The bound for
is
. Given a fixed
, the bound for
is
. Thus, the integral is
Approach 2: The bound for
is
. Given a fixed
, the bound for
is
. Thus, the integral is
Example. (Volume of tetrahedron)
Consider a tetrahedron in
with vertices
and
in which
and
are positive numbers. Define vectors
and
. Prove that volume of the tetrahedron is
. (i.e.,
of the volume of parallelepiped spanned by the vectors
and
)
Proof.
Let the plane containing
and
be
. To find the equation of
, consider its
normal vector. A normal vector of
is
Therefore, the equation of
is
The desired volume is the volume under the graph of
over a region
,
and the region
is the projection of the tetrahedron on the xy-plane, which is the triangle with vertices
in
.
Because the line passing through
and
has equation
,
the bound for
is
, and the bound for
is
given a fixed
.
Thus, the desired volume is
On the other hand,
which equals the desired volume.
Example. (Switching integration order) Prove that
is approximately
. (correct to two decimal places)
Proof.
If we integrate in this order, the computation will be very tedious. Thus, we will interchange the integration order using generalized Fubini's theorem to ease the computation.
Originally, the bounds are
and
(given a fixed
).
If we integrate over
first instead,
the suitable expressions of bounds are
and
(given a fixed
).
Therefore,
Remark.
- Example of analogous case in
:
(the overlapping set of
and
has zero length)
- Curves and points have zero area in
.
Remark.
Recall that area of a bounded region can also be found by single integration. In some cases, using this proposition instead is more convenient.
Proof.
Solving
and
, we get
.
Because
, intersection points of these two curves are
and
.
Therefore, the bound for
is
, and given a fixed
, the bound for
is
.
Thus, the desired area is
Remark. Geometrically, the bounded region
is a disk (region in a plane bounded by a circle)
of radius
.
Triple integration
The concepts in the section of double integrals apply to triple integrals (and also multiple integrals generally) analogously.
We will give several examples for triple integrals in this section.
Definition. (Triple integrals)
Let
be a function defined on a rectangular box (or rectangular cuboid)
in
.
Consider a partition of
into small boxes with volumes
respectively. Choose an arbitrary point
in the
th box. The function
is integrable over
if
exists. In that case, we denote this limit by
(
is a mnemonic of volume),
and call it the triple integral of
over
.
Remark.
- The process of computing triple integral is called triple integration
Theorem. (Generalized Fubini's theorem (triple integrals version))
Let
be a continuous function defined on a region (with arbitrary shape)
. Then, the following hold.
(i) if
, then
(ii) if
, then
(iii) if
, then
(iv) if
, then
(v) if
, then
(vi) if
, then
in which each function involved is continuous.
That is, we can use either one of all
possible integration orders for iterated integrals to compute triple integrals, with suitable bounds.
Proposition. (4-dimensional volume given by triple integration) Let
be an integrable function defined on a rectangular box
in
. Suppose
for each
.
Then, the 4-dimensional volume under the graph of
over
is
Remark.
It is just a theoretical result, and is difficult to be visualized.
Proof.
(i) The given bounds for
is
and
. We can express the bounds as follows:

- given a fixed
, aim: finding bounds for
in the form of
.
- Steps:

- given fixed
and
(
is selected from its bound, namely
, and
is selected from its bound, which depends on the fixed
), aim: finding bounds for
in the form of
.
- Steps:

Therefore, by generalized Fubini's theorem (triple integrals version) (i) and
proposition about volume given by triple integration, the desired volume is
(ii) Because there are eight octants (in
), and each octant is symmetric to each other. There are seven more regions that are symmetric to
in octants other than octant (+,+,+). Thus, the desired volume is
Remark. The region mentioned in (ii) is a ball (solid figure bounded by a sphere) of radius
.